5.00 EUR
This is a digital sewing pattern for two different models of an edwardian blouse.
Version 1 with a loose hemline, wide puff sleeves to be gathered at the elbow, pin tucks and lace insertions at the collar and chest.
Version 2 with a peplum, narrower puffed sleeves with cuffs, collar and chest insertion made from lace fabric.
Sleeves and techniques can be recombined among the two versions.
The blouse is closed with buttons at the lower part, snap fasteners at the chest insertion, such as hooks and eyes at the collar. So the blouse can be put on and taken off without help from anyone.
Also suitable for steampunk costumes.
The pattern comes with detailed and illustrated sewing instructions in English and German.
It is a multi size pattern you can choose between US 8-18 (EU 34-44) and US 20-30 (EU 46-56)
This is a PDF-Download pattern, immediately after payment you can download both sizes of the pattern.
Printable on paper size DIN A4 or US Letter.
Format DIN A0 to be printed on a plotter / copyshop on request without additional costs.
Recommended fabric: Lightweight cotton fabric, lawn, gauze
Fabric required:
Size US 8-18 (EU 34-44):
Vers. 1: 2.5 yds. 51“ wide (2,3m with a width of 130cm)
Vers. 2: 2.2 yds. 51“ wide (2m with a width of 130cm)
Lace required:
Vers. 1: insertion lace trim: 2.2yds. (2m) width approx. 3/4“ (2cm) narrow lace trim 2yds. (1,5m)
Vers. 2: lace fabric: 0.6yds. with a width of 35“ (0,5m with a width of 90cm)
Size US 20-30 (EU 46-56):
Vers. 1: 3.3 yds. 51“ wide (3m with a width of 130cm)
Vers. 2: 2.7 yds. 51“ wide (2,5m with a width of 130cm)
Lace required:
Vers. 1: insertion lace trim: 2.2yds. (2m) width approx. 3/4“ (2cm) narrow lace trim 2yds. (1,5m)
Vers. 2: lace fabric: 0.6yds. with a width of 35“ (0,5m with a width of 90cm)
Hooks and eyes, snap fastener, 9 buttons 1/2“ (1cm),
cotton tape 3/8“ (1cm): 3yds. (3m)